高电压值小电压做实验的时候检测仪（耐电孤做实验的时候检测仪）-（计算方法机管理）

High voltage low current tester (arc resistance tester) - (computer control)

食产品公司名称：耐电弧试验机

Product name: electric arc resistance tester

货品型號：NDH-A

Product model: NDH - A

足够规格：GB/T 1411-2002《固态绝缘层用料耐高压得过低电流量弧光击穿的冲击试验》（同等IEC  61621-1997）及ASTM D495等标准规定的需求来设计制造厂的，并按照IEC 149、UL 746A等做实验的时候办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

基本实用範圍及功效：

本现场实验机是通过应运于发电机、家居家电和家居家居家电等餐饮行业的焊工用朔胶、光敏树脂材料胶和接地漆等接地产品的耐弧光耐腐蚀性考评，主适用于液体接地产品如：朔胶、bopp薄膜、光敏树脂材料、黑云母、陶瓷厂家、钢化玻璃、接地油、接地漆、瓦楞纸板等物料的耐弧光耐腐蚀性软件测试；

本可靠性测试仪由计算方法机把控好正常运行，应该表明某个工作性性的状态及工作性性的时间，工作性性结束之后并保存图片某个工作性性数据文件，并可打印机.准则实验操作报告范文。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为横竖分立式成分，下端为方法系統，顶部为校正箱。

2 本企业产品分为*新智能化调整枝术，能够 选定程度（IEC或ASTM）可会自动展开试验装置，并在租赁上界面显示现场实验的时候和但是。

3 **效能优异，抗干挠力量强，测式精确性强。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断期限数据误差：超过 ±10ms

2 调压器使用量：2kVA

3 特殊实验设计线电压：12.5kV

4 现场实验电压降要求：±3%

5 电压调节精密度较：±10%  电流量在测量控制精度：1.5%

6 参比电极对试件各种压力：（0.5±0.05）N

7 金属电极涂料：钨棒

8 探针差距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用情况高温：（23±2）℃

10 的使用生活环境干湿度：（50±5）%

11 电源模块：220V±5%  50Hz  10A

12 冲击试验    方式方法：   行业标准/美标/10 mA 反复/20 mA 接连/30 mA不断/40 mA反复

13 疲劳试验程序流程图方式：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 新产品规格型号：

NDH-A    耐电弧放电检测仪-微机管控

NDH-B    耐电弧焊接试验装置仪-摸屏控住

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！